For a job like this you should have a basic Haynes or Chilton book for your van.
A normal driveway mechanic should be able to do this in about 4 hours.
Set park brake. Be SAFE!!!!!!
Loosten lug nuts 1 turn on wheel to be removed.
Use breaker bar and remove axle nut.
Jack up car & support with 2 jackstands.
Remove wheel.
Remove brake caliper assy.
Use tool to remove lower ball joint mount.
Remove both sides of the sway bar retainer cap and rotate sway bar down.
Now you can swing hub assy away from end of shaft.
Remove old shaft.
Carefully support ends and slide in new shaft.
Install is reverse.
GL
Dean.
Labor time will be about 5 hours.Labor time will be about 5 hours.
No you can't.
Under rear, in front of back axle.
there are axle shafts on the left and right fronts.there are axle shafts on the left and right fronts.
Not likely. The transmissions are different. If you own a 1990, you can use parts from 88 to (I think I remember this correctly) 92.
It might not have been torqued properly.
Can you show me pictures on a dodge neon 1998 on how to remove and replace a front axle.
bent drive axle or axles
buick roadmaster 1992 rear axle does it have limited slip diff
step one is the check lug nuts ----------- step 2 is the axle busted grease around axle
1 1/4 inch
quad4x4.com - Dana 70