0
What else can I help you with?
2005 Chevy Cobalt is staining?
i work fro a Chevy dealer and when your display goes bad it means radio replacement time. if your dash light work and not the radio you will need to replace the radio
How do you replace thse light bulb in a 2002 Bonneville Radio Display?
The people who state it is easy are STUPID. They are soldered on to the circuit board.
How do you repair or replace the clock display in a 1989 f-150 original equipt amfm radio that has gone dim?
It has a small light bulb in the radio you have to replace. Take the radio out and take it apart and you will see it in the front. You can get it from a Ford dealer or try www.rockauto.com - Enter year,model and make and go down to Electrical-Lamp & Socket/ Radio Dial Light Bulb
Hyundai accent radio?
how do you replace the radio light bulb
How do you fix H2 Hummer radio display light when radio works?
The problem is reported on many web sites. The power supply board for the display gets to warm and melts some of the solder connections. You will need to remove the radio from the dash. Remove the display panel from the radio and the top cover panel. When facing the front of the radio, there is a small board on the left side of the radio. It is held in place by two bendable tabs, one at the front of the radio and the other in the circle in the metal housing (both are in an area of white paint). You will also need to remove the screw in the rear heat synch. At this point, the board will be lift up easily. With a magnifing glass find any cracked or bad solder joint and touch it up. Be careful, the SMD are not glued to the board so they can slip when the solder is hot. Good luck.
How do you change the radio display light on a 2006 suzuki gran vitara?
To change the radio display light on a 2006 Suzuki Grand Vitara, you'll need to remove the radio from the dashboard. This typically involves taking off the trim panel surrounding the radio and unscrewing the mounting screws. Once the radio is accessible, you can replace the burnt-out bulb or LED by carefully removing it from the circuit board and installing a new one. Reassemble the radio and trim panel to complete the process.
Why does radio display in Pontiac Grand Am not work?
the light in the display is probly burnt out. if you take the radio out you can take the top off it and the light is right at the display. you can take it out with a screwdriver. sometimes the light is just loose and will still work but if you need a new one you can get it at www.corvetteradios.com. hope that will help you out.
How does the radio light function in your car's dashboard?
The radio light in your car's dashboard illuminates the radio display panel, making it easier to see and use the radio controls while driving in low light conditions.
How do you fix LED light for station selector and clock in 1990 Ford F-150 pickup Radio wtape player works perfect except the small window for station and clock display does not light up?
It's probably a bad connection. If you feel up to it, you could take the radio apart and re-seat the ribon cable that feeds the display assembly. Remove the radio, take the top plate off and you can replace the bulb for the display.
How do you replace bulb light on radio 2005 pontaic bonnievillie gxp and clock?
how do you replace light out radio and clock on 2005 bonnievillie pontiac gxp
On a 1995 Pontiac Bonneville dash lights do not come on if headlights are off radio display lights up if headlights are turned on radio display turns off and dash does not light up?
The instrument cluster lights have their own fuse. It's a 5 amp at the bottom center of the fuse block. When the lights are on, the radio draws lamp power from the instrument cluster. This allows you to dim the brightness of the radio display with the other internal lamps.
How do you fix a burned out radio light on a 1999 olds intrigue?
Replace the radio.
