to replace the mirror,you could use super glue! hey, it worked for me!
Unless the housing is damaged, there is no reason to replace it. Just replace the gasket.
how to replace front disk on liberty 02
how do you replace the AC compressor clutch on 2006 liberty
The thermostat is in the bottom radiator hose housing where it connects to the motor. The radiator needs to be drained, the bottom hose removed, and the housing removed to get to the thermostat. Make sure to clean all old gasket material from the housing, and fit the new thermostat in the proper direction.
follow the top radiator hose to locate the thermostat housing, remove the hose from the housing then unbolt the housing. remove and replace the thermostat and rebolt the housing to the motor, replace the hose The housing is made of cheap metal and should be replaced. It is important to "seat" the thermostat properly. Also, it is much easier to replace and remove the thermostat housing if you first remove the timing belt housing.
The thermostat housing on a Chrysler 302.7 L engine can be removed by loosening the 3 housing bolts. Remove the water hose and the housing will come off. Reverse the process to replace with a new housing.
go to parts house or yard ( save $100 ) replace entire housing
part of the fuel pump housing,replace complete fuel pump housing
Remove the thermostat housing. where is, and how do i remove the housing
Remove the housing and replace the gasket.
There are 2 small screws reachable through the rear-gate hinge. These need to be removed then pull entire light housing striaght back.
The housing gasket may be bad. Replace the gasket.