There is a triangular plastic plate on the inside of the car door that covers up the mounting screws for the mirror. You need to get the plate off first. I did this on my '92 passenger side and was unable to get the plate off without breaking it). Once the plate is off there are 3 screws that hold the mirror to the door. Take them out, change mirror, put them back in.
A driver side mirror of a Toyota Rave 4 is held on by mounting screws. Unscrew the hardware is unplug the wire harness for the remote control mirrors. Replace the mirror.
how to remove a passenger side mirror on a 2000 toyota 4 runner
To replace a mirror in a Toyota vehicle, first, the negative cable of the battery should be disconnected. Then, the mirror cover should be removed from the door panel carefully, and the wiring disconnected so the mirror can be replaced.
buy the service manual
To remove and replace the driver-side mirror on a 2001 Toyota Camry, start by carefully prying off the plastic cover at the base of the mirror to expose the mounting screws. Use a socket wrench to remove the screws securing the mirror to the door. Disconnect the electrical connector if your mirror is powered, then pull the mirror off. To install the new mirror, reverse the process: connect the electrical plug, secure the mirror with screws, and replace the plastic cover.
The small plastic cover in the corner of the window is removable. Mirror mounting fasteners and wiring connections can be removed to remove mirror.
To replace the driver's side mirror on a 2004 Toyota Sienna, start by carefully removing the interior door panel to access the mirror's mounting screws. Disconnect the electrical connector if the mirror is powered, then unscrew the old mirror from its mounting bracket. Install the new mirror by reversing the process: secure it with screws, reconnect any electrical connections, and reattach the door panel. Finally, test the mirror's functionality before finishing up.
Its quite easy actually. There is a cover where you control the angel of the mirror which will pop right off. After this you will see that there are 3 or 4 screws, after which the mirror will be able to come off.
The passenger side mirror on a 2001 Toyota Sienna is mounted by screws. To replace the mirror remove the mounting screws and unplug the wire clip.
it is in driver mirror
replace 2005 Nissan maxima side mirror
To repair a Toyota Sienna driver side mirror that won't stay in position, first, inspect the mirror assembly for any loose screws or damaged components. Tighten any loose screws, and if the mirror still won't hold its position, check the mirror adjustment mechanism for wear or breakage. If necessary, replace the adjustment assembly or the entire mirror housing. Finally, ensure that the mirror is properly aligned and securely attached to the vehicle.