Drain the coolant first.
Now take a hammer and a chisel and put chisel on 1 side of the freeze plug and hit it with the hammer. It will turn the plug sideways in the block and then pull the plug out with something.
Now clean and sand the block hole real good. Get a big socket that will fit in the new plug and put some yellow weather striping RTV around the new plug and then drive it back in the block with a hammer until it is flush with the block all the way around.
THATS IT YOUR DONE.
No
It can be hard to locate all of the little parts of a vehicle. The freeze plugs of a 1995 Chevy are located within the rear of the motor to the car.Ê
no!
The freeze pugs are sold for this car in sets of 10, it would be safe to assume that there are 10 freeze plugs on a 2001 2.2L chevy engine.
Ask Watt
NO it is not. But you do need to change the oil and filter.
yes
Follow the top rad hose to the engine , There you will find the housing undo bolts , clean gasket on housing replace with new gasket and thermostat. Make sure engine is cool and drain anti-freeze first
It is not a job for the amature. TAke it to a garage.
$500.00
No. They are different
The Chevy 5.7 liter is 350 cubic inches