Want this question answered?
Remove the wiring harness from the back of your headlight assembly. Remove the headlight assembly retaining bolts. Reverse the process to install your new headlight assembly.
the headlight assembly needs to come out in order to change the bulb ive had to do that to my 98 as well.
You need to remove the bumper cover in order to get at the lower bolt for the headlight assy.
If you mean the whole headlight assembly, the following link will work for you. It helped immensely when I had to take the whole assembly off my 98 to replace the lift gear. http://www.bfranker.badz28.com/headlightfix/
No it will not the 98 has a different contour than the 95
The headlight assembly can be changed, but not just the actual clear lens on the front. See "Related Questions" below for how to remove the headlight assembly, and also how to clean them
45 minutes top
Actually.. to take the headlight lens apart, put the Oven on 200, put the headlight assembly in oven for a few minutes at a time, as the headlight assy heats up, the adhesive will loosen up making it easy to remove the lens. For a demonstration, go to Youtube and type in "How to remove headlight lens from assembly"
when replacing the oil pump on a 98 ford winstar 3.0 liter engine do I have to pack the gears on the new oil pump
Open the hood, stand in front of one the headlight assemblies, notice two black tabs sticking up behind the radiator support in back of the headlight assembly, wiggle and pull tabs straight up and out. These two tabs lock the headlight assembly in place. With the two tabs out you can wiggle the complete headlight assembly out far enough to disconnect the wiring and remove the sockets that hold the headlight bulbs. Reverse procedure for install.
The antenna simply unscrews from it's base on the right hand shroud. Then screw on the new one and your done.
No - they are not.