Need to know the model. As is, you could be talking about a passenger car, or a tractor-trailer power unit. Generally, you just depress the tab in the bulb ballast on the backside of the headlamp assembly, twist counterclockwise, and it should come right out, allowing you to replace the bulbs. This is, of course, assuming your vehicle has composite headlights, and not sealed beam headlights.
1998 VOLVO S70 Headlamp Switch
To replace the headlight on a 1985 Honda, first, open the hood and locate the headlight assembly. Remove the retaining ring or screws that hold the headlight in place, then carefully pull the headlight out. Disconnect the wiring harness from the back of the headlight, replace it with the new one, and reconnect the harness. Finally, secure the headlight back in the assembly and replace the retaining ring or screws.
To change the headlight bulb on a 1985 Volvo 240, first, ensure the vehicle is off and the keys are removed. Open the hood and locate the headlight assembly; twist the bulb socket counterclockwise to remove it. Carefully pull out the old bulb and replace it with a new one, avoiding touching the glass. Finally, reinsert the bulb socket into the assembly and twist it clockwise to secure it in place before closing the hood.
To replace the headlight on a 2003 Volvo S40, first, open the hood and locate the headlight assembly. Disconnect the electrical connector from the back of the headlight, then remove the retaining clip or screws holding the headlight in place. Carefully pull out the old headlight and insert the new one, ensuring it is securely fastened. Reconnect the electrical connector and test the headlight before closing the hood.
see this youtube vid http://www.youtube.com/watch?v=ieXVCTWQHSY
To replace the headlight on a Volvo V70 you first need to remove the mounting bolts that go through the radiator core support. Remove the assembly with a ratchet and socket. Next, remove the locking collars from the back and remove the old bulb. Replace with new bulb and reverse directions.
To replace the headlight on a 1985 Toyota Tercel, first, open the hood and locate the headlight assembly. Remove the retaining screws or clips securing the headlight, then gently pull the assembly forward. Disconnect the electrical connector from the back of the headlight bulb, replace the bulb with a new one, and reconnect the electrical connector. Finally, reassemble the headlight assembly and secure it back in place with the screws or clips.
To replace a headlight lens on a 2004 Volvo S80, start by opening the hood and removing the screws or bolts securing the headlight assembly. Carefully detach the assembly from the vehicle and disconnect the wiring harness. Replace the lens by either removing the old lens and securing the new one, or replacing the entire headlight assembly if needed. Finally, reconnect the wiring harness, reattach the assembly, and secure it with screws or bolts.
The headlight on a 1985 Honda Civic is changed by lifted the hood open. Locate the housings for each headlight and find the harnesses for the bulbs. Pull out the old bulbs and replace them.
To change the headlight on a 1985 Honda Spree scooter remove the headlight housing. The scooter headlight will be mounting on the rear of the housing. Remove it and replace the bulb.
To replace the headlight bulb on a 1999 Volvo S70, first, ensure the vehicle is turned off and the headlights are cool. Open the hood, locate the headlight assembly, and disconnect the electrical connector from the bulb. Remove the rubber cover (if present), then twist the bulb socket counterclockwise to release it. Replace the old bulb with a new one, making sure not to touch the glass with your fingers, and reassemble everything by reversing the steps.
To change the headlight socket on a 2000 Volvo V40, first, disconnect the negative battery terminal to ensure safety. Remove the headlight assembly by unscrewing the retaining screws and pulling it out. Then, disconnect the old socket from the headlight bulb and replace it with a new socket by securing it in place. Reassemble the headlight assembly, reconnect the battery, and test the new socket to ensure it works properly.