Dodge Ram

How do you replace a left front speed sensor cable of dodge ram 2004 1500?

012

Top Answer
User Avatar
Wiki User
Answered
2012-11-09 12:46:20
2012-11-09 12:46:20

The left front speed sensor is electric and does not have a cable.

The sensor is accessed by removing the brake rotor.

001
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0

Related Questions


you look on another site and in the mannual

the sensor this located front under passenger side head #12 or 13 mm socket take bolt out an pull sensor

The speed sensor, on your Dodge Stratus, is located on the back of the transmission. The speed sensor has a wire leading to the front wheel.

they are in front and after your cat

In the exhaust, front of catalytic converter.

The cam sensor is located under the front of the right front (pass) head.

Where is the oil pressure sensor switch on a 2008 dodge caliber?

On the front of the throttle body.

on the drivers side of the motor, top, front of cam sensor

The cam sensor is under the front of the passenger side cylinder head.

A 1996 Dodge Ram does not use a mass airflow sensor. It has a MAP sensor mounted in front of the throttle body.

Need more info. Exactly what front door cable are you referring too...

what do i have to do to replace the front drive axles on a 2004 ford ecscap???

The cam sensor on a Dodge 4.7L is under the front outside of the passenger side cylinder head.

Which speakers are you trying to replace? Front or rear?

the crank sensor is located on the top front of the tranny

it's on the right front of the engine, not far from the crankshaft sensor

It is the O2 sensor screwed into the front of the catalytic converter.

It is the O2 sensor screwed into the front of the catalytic converter

The engine temp sensor is on the front of the engine, next to the thermostat housing.The engine temp sensor is on the front of the engine, next to the thermostat housing.

remove the air intake to show the back side of head. the temp sensor in on the corner close to front of car on driver side. its next to the cam senor.

It doesn't have a MAF sensor, the Map sensor is on the front of the throttle body.

It is in the front of the catalytic converter.

It is on the front of the throttle body.

There are two speed sensors on a 1996 Dodge Avenger, an input speed sensor and an output speed sensor. Both are located on the front of the transmission.


Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.