lift the tail gate and there are two phillip head screws on the metal by the tail light.
To replace the tag light on a 2005 Cadillac DTS, first, open the trunk and locate the light assembly on the rear panel. Carefully remove the lens cover by twisting or unclipping it, depending on the design. Replace the old bulb with a new one, ensuring it is seated properly, then reattach the lens cover. Finally, test the light to confirm it’s working before closing the trunk.
Unscrew the lens, replace the bulb, and put the lens back on.
You can not, you will have to replace the entire tail light.
I Figured it out. The dome light lens is hinged on the passenger side so you just pry the driver's side of the lens out and down to replace the bulb. The lens does not come completely like on other models.
To replace the dome light gently squeeze the lens to release the clips and remove. Next release the bulb from its mount. Install the new bulb and replace the lens.
Remove the dome light lens, pull the old bulb out, and replace with new bulb; replace the lens.
To replace a light bulb in the map light on a 1996 Toyota Camry, the lens for the light has to be removed. There are clips at two opposite ends that have to be nudged gently with a flat screwdriver to get the lens cover off.
I don't think you can replace just cover. Usually you have to get a new tail light.
To replace the dome light bulb first remove the lens. If you gently squeeze the sides of the lens it will come out. Remove the old bulb, put in the new bulb. The lens snaps back in place.
The taillights are an assembly. The lens covers can not be replaced separately
to replace tail light lens on a ford pickup. lower tailgate on side of bed that is hidden when tailgate is closed, you will see 2 screws. remove these screws and you can pull tail light out of bed.
Trying to replace the fog lamp lens on a toyota highlander 2005, Having trouble figuring out how to remove the defective ones.