Note:The drivebelt routing decal on the radiator shroud to help during drivebelt install * To replace the belt rotate the tensioner pulley clockwise to release belt tension * Remove the belt from the auxiliary components and slowly release the tensioner * Route the new belt over the various pulleys again rotating the tensioner to allow the belt to be installed then release the belt tensioner
This diagram is under the hood. Look for it
How do you replace a turn signal bulb in a 1998 cavalier
replace the starter on a 1998 Chevrolet cavalier
The only repair is to replace the head gasket.
The 1998 Camry did not have a serpentine belt. Do you have a 1998 Corolla?
With a screwdriver a wrench and some small fingers. Follow the wires if you have to to find it.
NEED help is there a diagram with the bolts in the backseat of a 1998 chevy cavalier?
I am looking for the Thermal fusible link for the headlights on a 1998 Chevrolet Cavalier
how do reset a 1998 chevey cavalier antitheft system if it want start and the anti theft light is on
what are the warning lights in the Chevy cavalier z24. and what do they mean
remove the bolt on the pully or use a pully remover depending on the style of pully and put new one on.
The 98 Cavalier 2.4 is a NON interference engine.
Six hours of labor to replace your 1998 Chevrolet Cavalier clutch. The cost will be determined by the labor rate. $75 an hour for labor will cost $450.
1998 Chevy cavalier with power windows are driver side window is down how can i jump the motor to raise it up thank you for your help
yes the 3800 v6 fit fit in a Chevy cavalier 95 and up
usually serpentine belts get their tension(tightness) from the belt tensioner
Check your coolant level.
HOW TO REPLACE A STARTER ON A 1998 CHEVY MALIBU
Either lubricate or replace the cables Remove rear wheels to lubricate all contact points
Chevy does not use inertia/reset switches.
Crutchfield.com says that factory speakers in the 1998 Chevy Cavalier Sedan are: 4" x 6" door speakers and 6"x 9" rear carriage speakers.