NEED help is there a diagram with the bolts in the backseat of a 1998 chevy cavalier?
The back seat of a Chevy Cavalier is a split bench seat. The release for the seat is located in the trunk behind the split. Simply pull the release and fold the seat down.
Yes
In the drivers seat.
38 inches
Take the back seat out and climb thru and turn the rod going thru the latch.
To install a child safety seat in a two-door Chevrolet Cavalier, first, position the seat in the back seat for optimal safety. Use the vehicle's seat belt or the LATCH system, if available, to secure the base of the child seat tightly in place, ensuring it does not move more than an inch side to side or front to back. If using the seat belt, thread it through the appropriate path on the car seat and lock it according to the manufacturer's instructions. Finally, double-check that the seat is securely installed and that the harness is adjusted correctly for the child.
My 91 Cavalier (RS 2.2L) doesn't have one but my 95 does on the left side of the drivers seat.
try your chev dealer and they should be free
There are two motor's for the top. They are on both sides of the back seat,connected to the rear passenger & driver side window cage.
There should be seat belt mounting points on the floor under the back seat.
The air bag module on a 2005 Chevy Cavalier is located under the passenger side seat. The sensor for the airbag is usually located close to the hood latch.
It is bolted on the left hand side (sitting in the drivers seat) of the engine.