If it is like my 97 transport, 6 cylinder, the way to change the belt is as follows: Locate the tension wheel near the center of the pulleys. Using a 3/8 inch rachet (without a socket), place the end into the square hole of the tension wheel. Using the rachet, push the wheel towards the firewall to loosen the tension on the belt. Remove the belt and release the tension. Follow the diagram to replace the belt reversing the process. Make sure the grooves in the wheels line up with the belt grooves.
how do you change a brake booster valve to a 1998 Pontiac transport
u dont
its above the serpentine belt on the lefth hand side of the engine
The 1998 Camry did not have a serpentine belt. Do you have a 1998 Corolla?
Remove battery. Remove left engine brace. Remove serpentine belt. Take off water pump pulley. Take off water pump! This was the easiest water pump I ever replaced.
What causes a 1998 Pontiac transport to run hot and engine shuts off
3400 v6
Replace it.
The proper tire size for a 1998 Pontiac Transport is P205/70R15. This info is on a sticker placed on the driver's door jam.
The ECM on a 1998 Pontiac Transport with the 3.4 V6 engine is located on the passenger side. It is behind the glove box.
If there is not an access hole in the rear trunk type area you will havfe to remove fuel tank to access
In the tank