answersLogoWhite

0

If there is not an access hole in the rear trunk type area you will havfe to remove fuel tank to access

User Avatar

Wiki User

18y ago

What else can I help you with?

Related Questions

How do you replace the fuel filter on a 1998 Pontiac Montana Transport?

u dont


Where is the fuel pump on 1998 fuel pump on a Pontiac transport?

In the tank


Is there anything you have to do to start up a 1998 Pontiac Transport after running completely out of gas besides fill it up maybe a safety switch?

If it will not start, replace the fuel filter.


Is the fuel filter located inside or outside of the fuel tank in a 1998 Pontiac Transport?

outside of tank.located in front of tank


What size is the gas tank for a 1998 Pontiac Transport?

The gas tank for a 1998 Pontiac Transport has a capacity of approximately 20 gallons. This allows for a decent range between refueling, depending on driving conditions and fuel efficiency.


Where is the fuel filter on a 1998 Pontiac Transport located?

Look under the vehicle along the frame rail follow the fuel line from the tank


Where is the fuel pump in a 1997 Pontiac transport?

It is inside the fuel tank. You have to remove the entire tank to replace it. I just did mine and it cost $1350!


Where is the relay for a 1992 Pontiac transport?

Where is the fuel pump relay on a 1992 pontiac transport van


Where is fuel pump located on a 95 Pontiac transport?

In the fuel tank


How do you replace the fuel filter located on a 1998 Pontiac Grand Am?

thanks to our friends at www.AUTOZONE.com go to the link on the right of the page


Were is the fuel shut off on a 93 Pontiac transport?

None


How do you check fuel pressure on 1998 Pontiac Transport?

To check the fuel pressure on a 1998 Pontiac Transport, you'll need a fuel pressure gauge. First, locate the fuel pressure test port on the fuel rail, then remove the cap from the port. Attach the gauge securely and turn the ignition to the "ON" position without starting the engine to read the pressure. The normal fuel pressure range for this vehicle is typically between 40-47 psi; if it's outside this range, further diagnosis may be needed.