The spindle on the Pontiac Grand Prix, rear axle is retained by four bolts 17 mm in size. (usually, sometimes 18mm) Remove wheel. Remove the disk or drum however equipped. (A drum should just slide off. Check for thin metal "keepers" on two of the studs. ) If it is a disk, remove the caliper via two retaining bolts. (they need a torx brand driver to remove) remove the disk by sliding it off. The hub assembly is a modular unit. It is sealed and thus has to be removed as a unit. There is a large hole in the hub to facilitate the removal of the retaining bolts through the hole. Remove the bolts, and that's it. To install, reverse the process. The hub assembly needs to be torque correctly. Ask the auto parts store for the torque settings. Special note: The front hub assembly is the same in that you need to follow the same directions as the rear. The only exception is that the drive axle passes through the assembly using "splines". Be carfull not to damage the threads on the axle.
how to replace fuel tank pressure sensor pontiac gran prix 1997
It's in the fuel tank.
The steering system in a 2005 Grand Prix is comprised of many different moving parts. The steering will shimmy when any of the parts begin to wear out.
with tools
up under the bottom of the radiator on the passanger side
"How do you clean the throttle body on a 2000 Pontiac Gran Prix?"
2005 Pontiac Grand Prix 3.8L SFI OHV 6cylThe Spark Plug Gap.060 (In thousandths of an inch) 2005 Pontiac Grand Prix 5.3L SFI 8cylThe Spark Plug Gap.040 (In thousandths of an inch)
Check you spark plugs. Probably going to need to replace them.
GTO (Gran Turismo Omologato) Gran Torino Grand Prix
Take out the windshield washer tank and the bar that goes across baterry is right below
The cast of International gran prix - 1924 includes: Tullio Carminati Diomira Jacobini Franz Sala
36mm