Want this question answered?
To replace the oxygen sensor on a Honda Odyssey, first unscrew the sensor. Then use a 22 mm socket or 7/8 inch wrench to replace the oxygen sensor.
An Oxygen sensor does not reset. You have to replace them and yes they are expensive.
To replace the oxygen sensor disconnect the oxygen sensor electrical connector. Use an oxygen sensor socket to remove the sensor. spray the sensor with penetration oil if it is difficult to loosen. install in reverse.
get the right oxygen sensor
how do you replace oxygen sensor of 2001 bmw 318 ci es
You bring it to a service station and tell them to replace the oxygen sensor.
You can not successfully clean an oxygen sensor. You need to replace it.
Soldering will be required to install the universal oxygen sensors. Specifically you'll need to first cut the old sensor off on the main wiring. Then one needs to solder the universal sensor onto that existing wiring.
With an o2 sensor socket.
LOCATED UP FRONT ON EXHAUST MANIFOLD YOU WILL NEED THE PROPER TOOL FOR REMOVAL. A SPLIT SOCKET AND PROPER SIZE FOR YOUR CARS OXYGEN SENSOR FOR YOUR VEHICLE. REMOVE CLIP TO SENSOR INSTALL SOCKET AND USE A BREAKER BAR TO LOOSEN ,ONCE OFF BUT A GENOROUS AMOUNT OF ANTI SIZE LUBRICANT ON TREADS THEN REINSTALL. TIP: OXYGEN SENSOR WHEN PURCHASING BUY UNIVERSAL IT HAS NO CONNECTOR DONT WORRY!! SOLDER THE TWO WIRES TOGETHER AND SAVE GREAT AMOUNT OF $$$$$$MONEY$$$$$$ BELIVE ME.
You need to take a wrench to loosen the oxygen sensor, then you will need to disconnect the cord. Once you have done that you will then pull out the old oxygen sensor.
Take it to the dealership.... Its real simple take the car jack it up take off the housing cover where the oxygen sensor is at then un plug the sensor, and replace...