Begin by removing the tire and wheel from your 1999 Dodge Adventure. Remove the end of the axle. Remove the wheel bearing retaining nut. Remove the wheel bearing seal and remove the wheel bearing. Reverse the process to install your new wheel bearing.
how do i find out if i have ABS on my front wheel bearing , on my 2000 dodge Dakota quad cab 2 wheel drive
The Dodge Intrepid was always front wheel drive.
Yes , the 2002 Dodge Intrepid is front wheel drive
It cost me around $200
In order to replace the rear wheel bearing you will need to find the axle shaft bearings and remove them. They are located at the center of the housing where the ring and pinion gears and at the axle end near the wheel mounting position.
yes, the rear is more expensive than the fronts.
Front is easy, just replace hub rear is pressed in
The front bearing for a Dodge Stratus is attached to the Hub. To replace it remove all the components on the hub assembly. There are three bolts that hold the assembly in place. Loosen the bolts and pry out the hub. Replace the unit.
no need to replace wheel bearing unless the wheel bearing is worn out
You can't, it is a sealed wheel bearing.
approx. $50 on each for DIY