you have to close the outlet valve with the system running. its called a pump down. when you have that done close the inlet valve. now you should have all your refrigerant in the compressor and accumulator. now you have to sweat out the valve and braze in a new one. next you must suck the open part of the system into a vaccum and have it hold at 19 inches for 24hrs. if it passes then you can reopen your valves and start the system back up. hope it helps
how do you replace the expansion valve
Remove the bottom hose from the evaporater at the firewall, pull out the expansion valve, i highly recommend flushing out the system to remove excess sludge. Replace the valve and the hose.
in the valve cover
On a 1996 Chevy Camaro, the PCV valve is located on the right side of the valve cover. There is a hose that runs from the PCV valve and connects to the back of the intake manifold.
how do I replace the AC expansion valve on a Mercedes C280 sedan. location and procedure
Where is front expansion valve for chevy suburban 1997
How do you replace evpansion valve on 99 gs 300
How do i replace the purge valve on a 1999 Chevy Monte Carlo
Chevy tahoe has a oriface tube
Yes but, it is called an orifice tube.
The best way to fix an expansion valve for the A/C system is to replace it. of course then you have to evacuate and recharge with freon.
The PCV on a 2001 Chevy Camaro SS is located on the left valve cover. Pulls gas buildup from inside the engine and sends it back into the intake manifold.