You will have to remove the entire door panel to get at the screws that hold the handle assembly to the panel.
maby you should Expierement on it or go ask google ok sorry.
Here's a link I just found. Hope this helps http://www.bodyshopzone.com/archives/trim/door_panels/Chevy/CK1500_1998/dp_remove_chevy.html
You will need to remove the inside door panel of your Chevy truck. Remove the door handle linkage. Remove the door handle retaining bolts. Reverse the process to install the new door handle.
Best source is LMC trucks.
It unbolts from the inside of the door, so, you have to pu;ll the little inside panel. It just pops out.
how long does it take to replace a carburetor on a chevy truck?
replace heater core in a 1991 Chevy work truck 1500
how do you replace the door handle in a 1997 Chevy suburban passengers front door? Check out the GM truck forum here- nice step by step instructions with pictures http://www.gmtruckclub.com/forum/showthread.php?t=18577&highlight=door+handle
Where is the fusible link in a 2005 Chevy HD truck
Yes there the same.
Remove inside door handle and window crank handle, remove inside door panel, remove vent window and channel assembly, remove window.
On the inside part of the handle there is a snap ring that holds the handle on, you need a special tool to remove the snap ring. Once removed, just pull off the handle.
how do replace a power steering hose on a Chevy c-1500 pickup truck
How do you replace the front drivers seat on a 1996 Chevy S10 pick up truck
need diagram for heater core for a 1994 Chevy truck.
No, it would not be able to handle engine braking.
You need to periodically replace the headlights on your Chevy truck when the headlights start getting dim. You can purchase replacement headlights from retailers such as Parts Source.
around 6000lbs depending on bed/cab configuration, endine and options, check the tag inside the driver door. A 1989 Chevy 1500 weight is between 4023 and 4748 lbs depending on trim level. Just FYI the tag inside the door does not give the weight of the truck it gives the hauling capacity. Which is the additional weight above the weight of the truck that the truck can handle on its on 2 axles.
The usual reason that a door will not open from the inside on a Nissan truck is because the door handle is broken on the inside. The door panel will have to be removed and the door handle repaired or replaced to open the door from the inside again.
replace ighnition switch for 1985 chevlot
A chevy 3500 truck is not front wheel drive, so it does not have CV joints.
Empty and remove the fuel tank. It is inside the tank mounted with the level sensor. (remove it from the top)
You first need to remove the door panel and then unbolt the side view mirror from the inside of the truck.
You will need to remove the inside door panel, by prying outward on the door panel retaining clips. When the door panel is removed the door handle assembly will be visible. Remove the door handle retaining bolts.
By removing it and replacing it with a bran new one.