answersLogoWhite

0


Best Answer
Changing taillight assembly Jeep liberty

I copied and pasted this from another blog.....it works perfectly!!!!

For the drivers side taillight assembly remove the two screws on the side of taillight assembly. You need a special star screw driver (called "Torx", the come in different sizes). Don't strip the screws. If you do you will be in a world of hurt trying to remove these screws. You have to swing the tailgate open to see the screws. Once those screws are removed you have to pry the taillight assembly from the vehicle. Pry it straight out using a couple of large screw drivers as pry bars. Be careful not to scratch the paint. There are two plastic shafts that clip into the body. They run along the outside edge of the light assembly. Apply steady pressure with the pry until they come loose. It will take some force to break them free. Do not try to pull the assembly out with your hands from outside the vehicle as you will probably break the assembly.

User Avatar

Wiki User

14y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How do you replace brake light in a 2002 Jeep Liberty Sport?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

Where is the fuse for brake lights located for 2004 jeep liberty?

w to replace center brake light in 2004 jeep liberty


How do you change the rear brake light bulb on your 2000 mercury villager sport?

Just unscrew the rear brake light, turn out the socket, and replace the bulb.


Why won't the brake lights come on in 2002 Jeep Liberty Sport?

Brake light switch might need to be replaced. Simpler answer would be a blown fuse.


How do you replace brake light switch on 2001 Montero sport?

Should be located at the upper end of brake pedal under dash area


How do you replace the Brake light on a 2000 ford explorer?

To replace the brake light on a 2000 Ford Explorer, remove the screws holding the brake light in place. Gently, but firmly, pull the brake light out of the vehicle and replace with a new one.


How do you replace brake light on Nissan tiida?

How to replace a brake light on a nissan Tiida hatch back.


Why does parking brake light stay lit on 1999 Mitsubishi Montero sport?

The parking brake light stay lit on the 1999 Mitsubishi Montero sport the parking brake is working and you have not put the light off.


How do you replace the brake light on a 2003 Toyota Echo?

To replace your brake light, you need to unscrew the brake cover from the inside of the trunk. Then you will be able to pull the old bulb out and replace it.


What is the bulb number for brake light on 2004 jeep liberty?

See sources and related links below for the 2004 Jeep Liberty Brake Light Lamp Numbers.


How do you replace the Brake Light Switch in a 2000 ZX2?

how to replace the brake light switch at the pedal of a 2001 ford zx2


How do you replace a brake light bulb on a Fiat doblo van?

how to replace brake light bulb fiat doblo van


Why does the check engine and brake light stay on a 2000 Miisubishi Montero Sport?

i have a 2002 montero sport i had the same issue i replaced the brake pads first no luck 2 days later i had to replace the alternator after that both lights went off