0
I also would like to know how to do that without dissamble to whole gearbox. Anyone a idea ?
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
Need picture of John Deere GX75's deck belt routing?
yall are stupid
John deere riding mower GX75 diagram?
I have been looking for a wiring diagram for 2 months and still no luck. If you find one, please email me at nemolilo@comcast.net
John deere gx75 were is the oil drain plug?
The drain plug is on the right side of the engine, just above the chassis. Takes a 10mm wrench.
On my John Deere Gx75 oil is getting into your muffler is there any other reasons beside a bad head or head gasket?
it could be too much oil or a worn valve guide or ill fitting rings i highly doubt it is a head gasket problem
What size belt for John Deere stx38?
The part number is GX10064 and is 1/2" x 94.49"
How do you repair brakes on john deere gx75 mower?
I just fixed the brakes on my GX75. I removed the linkage from the transaxle, then I removed the nylock nut that held the brake lever on the transaxle. I had to remove the braket that the brake lever rides in also. On either side if the threaded stud that held the brake lever were a couple of pins that should float freely. Mine did not. soak with PB Blaster or some other penatrating oil. Go do something else for a while. I would strike mine with a hammer and the put vice grips on as tight as they could go, with the hangles pointing out away from the transaxle. I would wiggle up and down and add more oil. They were very, VERY hard to get out, be patient. I chucked them up in my cordless drill and gave them a spin with some sandpaper. Then I greased them up and replaced. I put a big blob of grease on top to both lube the brake lever and keep moisture out. After reassebling everything I tightened the nylock nut until I felt the brakes drag a little, then backed off till the mower rolled freely. They work great now.
Were is oil drain plug john deer gx75?
The drain plug is on the right side of the engine, just above the chassis. Takes a 10mm wrench.
