The part number is GX10064 and is 1/2" x 94.49"
what size belts for a john deere L100 5 SPEED DO YOU NEED?
what size nut is on the blades on a john deere z225 42 in mower
The belt is a M74747 which is 1/2" x 105"
The engine mount bolts on a John Deere STX38 are typically 3/8-inch in diameter. It's important to check the specific service manual for your model, as bolt sizes can vary slightly based on manufacturing variations. Always use the recommended torque specifications when reinstalling bolts to ensure proper engine mounting.
4L 63 inch
The John Deere LX172 38 inch blade deck uses a 65 by 1/2 inch V belt. If you ask for a 65 inch belt at an auto parts or hardware store, there is no need for a multi-numeral part number.
91" long, 5/8 wide
It is 187" long. Checked at the local John Deere dealership.
here is a diagram that might be helpful: https://jdparts.deere.com/partsmkt/document/english/featbene/L120_L130_48_3N1deck.pdf
Deere"s number for the auger is #M123224 and drive is #M110637 which is 31" x 1/2" and 30" x 1/2" respectively.
A John Deere 2040 had a rear tire size of 13.6-28
yes you can but sent me the belt size so i can make sure