0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
How do you replace the cabin air filter on an 2003 Acura MDX?
Purchase a Purolator Cabin Filter. It comes with detailed instructions.
How do you replace the engine air filter on an 2004 Acura MDX?
For a 2002 MDX, there are four screws to remove the cover. Then remove the spring ring holding the intake hose. Remove the cover and replace the air filter. Replace the cover and screws and then reconnect the intake hose and spring ring.
How do you replace a cabin filter on an 2006 Acura MDX?
Remove glove compartment by removing screws on each side. The really weird part is that you need to cut and disregard the metal bracket that is behind the glove box to get at the filter. Replace the box. Removing the bracket has no effect.
How do you change air filter for Acura MDX 2001?
take out the glove box there is a metal strip the filler is behind it.
Where is the iat sensor on 2003 Acura MDX?
In between air filter and throttle body. Very easy to replace you don't even need any tools! Just unplug electrical connection and it has a metal clip that holds it in place.
Fuel filter for 2005 Acura MDX?
where is fuel filter located
What is code P0420 on Acura MDX 2004?
replace cat
When do you change the fuel filter on a 2001 Acura MDX?
I read the book on my Acura Mdx maintenance schedule and it doesn't show anything about changing the fuel filter. I personally wouldn't worry about it unless you are haveing problems. Just go by your book and have the service done as required..
Where do you look to change the transmission filter for 2003 Acura MDX?
you cant it's internal, transmission has to be disassembled
What is the oil capacity of a 2008 Acura MDX?
The oil capacity of a 2008 Acura MDX is 4.5 quarts when the oil filter is changed. Oil changes are recommended every 3 months or 3,000 miles.
What is the oil capacity of a 2005 Acura MDX?
My book states that the oil capcity with filter is 4.5 US Quarts
How to replace Mdx tail light?
Open up the rear hatch to the MDX. Pull back on plastic tab covers and loosen and remove 2 hex nuts per tail light.
