Want this question answered?
To replace the dome light on a Grand Am, unscrew the light cover. Pull it down gently. Disconnect the light. Connect the new light, replace the light cover, and replace the screws.
There is a small slot on the hard plastic cover near the end of the dome light you will need a small flat head screw driver insert the screw driver in that slot use a back and forth motion to remove it.
I don't think you can replace just cover. Usually you have to get a new tail light.
How do you replace a broken tail light cover for a 2005 Nissan Pathfinder ?
To replace the dome light in your 2005 Toyota, you will need a flat screwdriver to remove the screws and pry the dome light cover from the light. You can then access the light to change the bulb or replace the entire bulb and cover.
How do you remove cover to replace brake light on 57 kia Rio
You have to remove the cover for the third lite by poping the cover off using a small screw driver. Be carfull not to crack it because the plastic cover should be a little britle. At this point you will see the socket mounted inside the lens housing. Turn the socket clockwise for about a quarter of a turn and the light will come out with the socket. Replace the bulb, seat the socket, replace the cover and your done.
you take the light out and put the new one in
IT is in the sun
There are no screws in the dome light cover of a 1997 Toyota Camry. You can pry the cover off with a flat bladed screw driver.
if you look at the plastic cover, you should see two notches towards the rear of the cover. insert a tiny screw driver or other prying device and gently pry down and to the opposite side of the cover, it should easily pop off. remove and replace the bulb, and put the cover back on.
first remove the front bar cover from driver side second remove the driver side head light,third undo the plastic cover under the driver side guard,fourth remove the windscreen washer bottle.now u can see the electric power steering pump just undo it.