You will have to remove the headlights, grill, front bumper, both outside fenders and anything attached to the core support. Then drill or grind the spot welds that hold the core support to the inner fenders, roughly about 20 to 30 a side and beat the old support out and replace with new support and reweld. Have fun. Lol.
a radiator core support
In Short, No. In Long, No, it goes into the core support which also is where the radiator mounts into.
If you mean the plastic overflow tank, replace it. If you mean the plastic tanks on either side of the radiator core, replace the radiator.
it's in the wiring harness up front by the radiator core support.
Yes but the car is a uni body which means the body is the frame. and the core support does not bolt in it must be welded.
The core support is the (metal) framework that holds the radiator in place. This should be true on all vehicles that I know of.
Replace it with a new one.
bolted to the front core support in the grille.
it is in the radiator core support on the driver side under the headlight
On the core support, drivers side of the radiator.
cut upper core support with sawzall flush with radiator sides after removing radiator
Take it to a mechanic and say "will you fix the heater core?"