Open Hood, Remove single screw from top of Blinker or Marker Light. Once Removed slowly pull lens out and you should be able to get to bulbs from there once you turn connectors and remove from Lens Assy
How do you replace the clock on accord 1992
How do you replace a radiator on a 1991 Honda Accord
You replace it by not doin it
Never heard of a Handa Accord. A 1992 Honda Accord is Front Wheel Drive. Honda does not make a 4wd Accord.
how do you replace the expansion valve
U A P Napa Auto parts store or an import salvage yard.
Remove the front bumper cover. The tank and pump should be free for removal from the bottom.
The minimum brake rotor thickness for the front and back rotors on a 1992 Honda Accord is 21mm. Rotors which are below this thickness will not offer adequate or reliable braking.
take it to the shop!
O Ring for what component.
they are located near the front engine
in front of the passenger seat under the glove compartment on the floor.
the distributor does not work, you can either try cleaning it or replace it.
you have bulbs burnt out either on the front or rear of your car or your flasher is going bad
Under the carpet in the front passenger floor board.
Disc brakes in the front and drum brakes in the rear.
there is no line comming from the water pump on any 90 s accord u replace the whole pump behind the timing belt
"What is the valve clearance on 1992 Honda accord?"
50 to 100 for labor, 100 to 200 for the part, if that is it
With a wrench.
Remove the front door panels. (The door panel procedure has already been answered on here many, many times, please search for it). Four Philips screws hold the speaker in, remove them, unplug the wires.
yes, as long as the 1992 accord is also an automatic
There is a difference. The 1992 front bumper has a more rounded look than the 1991 model but it should fit. Not 100% sure about that but I suspect they should both bolt on the same.
How do u know if a start went off on a 1992 Honda accord.
where is the cooling sensor Honda accord 1992