The 1990 uses a t50. The 89 is probably the same.
To replace Melex golf cart brakes, you will need parts that vary depending on the model. In all cases, you will need the new brake shoes and possibly the calipers. You can replace these parts using standard tools including a Philips screwdriver.
Tools needed to replace front brakes 2002 Ford Focus?
To replace brakes effectively, you need to know what type of brakes you have. In general, you will need a jack, new brakes, a wrench and Allen wrenches.
It takes a T55 Torx bit on the front calipers.
To replace disc brakes you need to first remove your tires. After removing you old pads and rotors you then want to reset the brake calipers. Then replace your pads with new pads and either replace or resurface your rotors as needed. Once everything is put back together you want to fully depress your break pedal until resistance returns. The final step is to drive test you breaks to make sure every thing is functioning properly.
The only part that is needed to replace your 1997 Pontiac rear brakes is a break assembly kit. The brake assembly kit will have everything you need.
First, they're called BRAKES. Is that even a question? Yeah, replace them if needed. How's that?
The brakes on the Villager are as straight forward as the brakes on a 1965 Mercury. Only normal brake tools are required.
first off are they disk brakes, (like the front one)? or drum brakes?
Assuming you mean "replace" the brakes, the brakes should be inspected for condition every time the vehicle is serviced and repairs, if any needed, should be done at that time.
More detail is needed . Do you mean disc pads, or pads and rotors, or calipers with pads and rotors, or completely new calipers, brakelines and master cylinder. -All of these are viable but different options.-You need to be MUCH more specific in what you want.More detail is needed . Do you mean disc pads, or pads and rotors, or calipers with pads and rotors, or completely new calipers, brakelines and master cylinder. -All of these are viable but different options.-You need to be MUCH more specific in what you want.
I just did my 2005 Ford Escape front brakes and the caliper was 7mm Allen and main holder is 18mm ...RRR Wis.'