Want this question answered?
If its anything like my 04 sonoma, there should be two flat pins which hold the headlight assembly in place. the pins come out, the socket for the bulbs become acessible. twist out and replace. .
where is the iat sensor located on a 2003 gmc sonoma truck
IACV-AAC Valve removal 2003 frontier
This site is spam
Sonoma Wire Works was created in 2003.
To replace the valve cover gaskets on a 2003 Jeep Liberty, the valve cover is removed. The old gasket is then removed from both the valve cover and the manifold (old gasket will come off in pieces on both sides). Then spread the sealant on the manifold, place the new gasket on, then put sealant on top of the gasket and replace the valve cover and bolt down.
go to the local auto shop and tell them you ned your pcv valve replaced
In order to remove the turn signal from your 2003 GMC Sonoma, you would need to remove the lower dash cover and also the steering column cover. I have included a video below in the related links section that will show you exactly how to fix this.
its molded to the valve cover you cant just replace the pcv valve gotta do the whole valve cover or an in-line filter setup
Check
I have a 95 Sonoma. I use 5W30.
your self its easy