Want this question answered?
i had the same problem. you need to replace the switch behind the hazard light button and that will solve the problem.
Hit the Hazard button it will be a triangled shaped button
There is a button near the hazard light button to do that.
The hazard switch is located on the button itself. In a 1999 Honda Civic find the hazard button, which is located on the dashboard.
You dont have to take if apart just fake out the button and put a new one in
how do you replace ambient light sensor on 2002 silverado
wiggle the hazard button if it works you need to replace the turn signal control arm and hazard button they come all in one piece
It's built into the hazard light switch. The hazard light button will slide out, with the relay (small box) attached.
On the interment panel there are screws around it. Remove them and remove the covering. You should now have small access hole to the right to the hazard button.
You replace the hazard light fuse in a Ford Explorer in the fuse panel box. The fuse panel box is located under the vehicle's hood.
If the car is an 87 Pulsar, the reset switch is under the kick panel (Plastic between the bottem of the dash board & the floorboard) on the drivers side. Take this panel off & the switch is a push button on the metal box. Push the button & check the sensor light. The sensor light may also meen it's time to replace the timing belt. Don't ask how I know this.
if you mean the brake light switch they are removed in diffrent ways, some you can unscrew , some have a c-clamp.