Want this question answered?
To replace the headlight motor on a 240 SX Nissan, unhook the positive cable on the battery first. Then take a picture of the headlight motor before taking the old one off. Remove the wires and screws holding the other motor in place, then place in the new motor, tighten the screws, and hook up the wires while looking at the picture. Connect the battery cable.
Yes. The ka24de motor is used from 95 through 98.not just used from 95 to 98 because i have a 1990 240sx with a ka24de in it
yes it will with the correct engine mounts, cross member and loom
The problem is with the 240sx , a.k.a the s13 silvia , you will need something along the lines of a onevia kit , so basically you will need the bumber , lights m the headlight motor and wiring , go to your local body shop and ask what they can do , and also try to find a local wrecker with some parts from a 180sx or a 240sx onevia.
Yes, some '92 240sx' came with the ka24de motor.
no
it has a ka24 2.4l dual over head cam
take out the halfshafts pull the motor and unbolt the tranny
On 1989-1994 240SX, Top speed only goes to 115mph due to VSS. 240SX is not exactly known for topspeed but stability, and for the motor Torque since it was actually used for Nissan Trucks. 1997 Nissan Hardtop for ex.
you can get it from a junkyard for like 5 bucks, any 240sx window motor will work. dont go to a dealer because I went and they tried to charge $100.
>>"What type of valves does a 1989 Nissan 240SX have?" what exactly are you asking? the factory motor for the 240sx's, years '89-'90, is the KA24E, single cam, 2.4 liters, 12 valve. It has two intake valves, and one output valve.
NO, to pass smog test, it all needs to be original