i have 96ford 7.3 diesel ineed to know how to replace hi presher oil pump
I cut and welded the correct size allen wrench to an old long screw driver shaft and used that to turn the pump. You can chuck it up into a drill to prime the pump also.
you must first, lift the engine from underneath, then you are able to uncrew the bolts. then slide the pan forward to get it out. this is the only way
Not from the factory because it has a mechanical fuel pump with your carburetor equipped engine
The 1973 Mustang has a mechanical fuel pump driven by the engine. It is not electric so it has no fuse.
5Ltrs incl filter.
No. Not that I can remember. The '74 is the same as the '73. Just change the oil and the filter.
there were 3 placements for the fuel tank in 73. behind the seat, under the bed, or saddle tanks. There is a mechanical gas pump which runs off the crankshaft of your engine and sucks gas out of your tank. In 73 they put the fuel filter after the pump so many times the pump needs replacing, if so put the fuel filter in front of the pump, it will last longer.
5 1/2 to 6 quarts
Time to change the pump. But a " 73 ? Maybe the pick-up is blocked. Have to drop the tank to check it out.
Chrysler outboards produced after 1966 require a 50:1 fuel to oil mix.
In 1979, a barrel of oil cost the 2010 equivalent of $74.23 dollars per barrel (in 1979 it was $25.10)
The manual sez that the odometer lamp is a '73' but offers no help on how to replace it.