you have to replace your spark plug wires there is a coil on each wire for each cylinder.
8 -------------------------------------------------------------------- If you have a 1998 or newer Ford Crown Victoria that has the Coil On Plug ( C.O.P.) ignition system there are ( 8 ignition coils ) as mentioned above Before that the 4.6 liter in a Ford Crown Victoria had ( 2 coil packs )
http://www.ehow.com/how_4509339_replace-ignition-coil-pack-ford.html
It has what is called coil on plug style ignition sys. Each spark plug has its own individual coil right on top of the plug.
firewall 4 - 8 3 - 7 2 - 6 1 - 5 front ( assuming you have the Coil On Plug ( C.O.P. ) ignition system )
I'll include a link to a video below that will show you how to repair the ignition coil in your Ford F250 or F350. hope this helps.
On a 1995 Ford Crown Victoria : There is no distributor , it has an Electronic Distributorless Ignition System ( EDIS ) with ( 2 ) ignition coil packs that have four towers on each where the spark plug wires connect
What is there stance specifications on an ignition coil for a ford 5.8 f250
To replace the ignition coil on a 2003 Ford Escape, first, disconnect the negative battery terminal to ensure safety. Then, remove the engine cover if necessary, and locate the ignition coils on the engine. Carefully disconnect the electrical connector from the coil, remove the bolt securing the coil, and then pull the coil out. Install the new coil by reversing the process, ensuring it is properly seated and the connector is secure before reconnecting the battery.
Replace the ignition switch, or try the correct key.
Asking "Where is the ignition coil located on a1985 ford 4.9 with efi?"
my 1985 ford crown Victoria ignition has locked up! what do i do?
First thing is to make sure you have fire (spark) at the spark plugs. If not change the ignition coil.