you will need security type star screw drivers , remove three screws from bottom of column cover,remove three screws from ignition switch.Replace with new switch.
Replace ignition switch for 1993 buick century?
no only up to a 1990 model
Remove the retaining ring at the top of your 1993 Chevrolet K 2500 ignition switch. Slide the ignition switch out and remove the wiring harness. Reverse the process to install the new ignition switch.
you have to replace the whole steering column
Caravan Pictures was created in 1993.
To replace the ignition on a 1993 Pontiac Sunbird, first disconnect the negative battery cable to ensure safety. Remove the steering column covers to access the ignition switch, then detach the wiring harness and unscrew the ignition switch from the column. Install the new ignition switch by reversing the process, securing it in place, reconnecting the wiring harness, and replacing the steering column covers. Finally, reconnect the battery and test the ignition to ensure it works properly.
Find your distributor cap and follow the center cable to a rectangular part. This is the ignition module. Remove it, get a new one and install it.
At least $75
It's really easy the switch is in the steering colume.
Yes
Loosen the tensioning pulley and install new belt. There should be a routing diagram in engine compartment or on hood.
because it's old