hi, The shift cable connects to a rocker arm that then connects to your shift rod, on most out boards there is a nut located underneath the carb's that you would remove. but in your case you must loosen the rocker arm (5/8" bolt) enough to get the pin out of the shifter rod, once the shifter rod is loose/not connected you take out the 7 bolt's that hold the foot on, off. then you will see the black plastic housing that hold the impeller take off the 4 bolt's and the impeller is off. I hope this helps
50:1 16oz per 6gal tank
Champion L77-JC4 plug set to .030in.
The dry weight of an 85hp Yamaha outboard is 245lbs.
On the 1976 model, 85 hp Evinrude, the overheat circuit is the only alarm system on the engine. Check the temperature on each head, due to independent thermostats, for an overheat condition.
The maximum speed of the 1963 peugeot 404 4cyl 85hp is 104 mph.
The maximum speed of the 1962 Sunbeam Alpine Cabriolet 4cyl 85hp is 99 mph.
60kph
The maximum speed of the Volvo 122 s 4cyl 85hp 1961 is 92 mph.
An 85hp Mercury outboard, serial number 3867469, is a 1974 year model.
85hp
50:1
1975-76.