Want this question answered?
how do u change the license plate light on a 2005 sienna
Look above the license plate and find the bulb assembly, grasp the flat part turn it clockwise and pull it out, the bulb just pulls straight out.
Ask your car dealer...
Open your trunk the two inner bulbs are for your license plate twist and should pop right out
how to change 2005 equinox license plate light i removed the screws but it didn't release
Look on the back side of the bumper find the socket turn it, remove the bulb replace it, reverse steps to reinstall it
remove the bulb holder from behind the lense (inside the bumper) with a 1/4 turn. replace the bulb and reverse for reinstalation.
You have to replace it by crawling under the bumper. It may be handy to have a flashlight with you. Twist and/or pull the bulb out to replace.
The license plate bulb on a 2005 Buick LeSabre is replaced by unscrewing the bulb cover and twisting the bulb. A new bulb can then be installed before putting the cover back in place.
The Adam Carolla Project - 2005 The Fellowship of the License Plate 1-2 was released on: USA: 11 October 2005
If you look under were the plate is the light is held in by 2 plastic screws just get a flathead screwdriver and separate them and light assembly will come right out
M6x1.00x20mm