The valve covers and rocker arms need to be removed as well as the intake manifold. Then remove the push rods to gain access to the lifters.
no.
Parts that old replace them with new ones.
how do u replace lifters
how do I replace a fuel pump on a 1993 Ford Bronco 302 5.0 L
No
how to replace lifters on a 03 grand am
The 4.9L ford straight six engine does not have adjustable lifters.
remove lifters from a 1999 ford f150
No to the roller lifters in the 2.8 Ford V6. The 2.8 as well as the 2.9 has regular flat tappet lifters and regular rocker arms.
The intake on the 1979 Ford 302 engine is different than the intake on the 1993 Ford 302 engine. The intakes are not interchangeable.
You will need a reverse rotation cam and lifters, reverse rotation front a rear main seals, reverse rotation distributor, and a reverse rotation starter.
Yes, you will need an E-curve cam to have the correct profile for EFI. Edelbrock, Comp Cams and other aftermarket manufactures have cams for such swaps, or you can find a cam from an 88-newer 5.0L/302 that has EFI from the factory, in doing this you will also need to change the lifters in your engine as stock 88-up engines feature hydraulic roller lifters, any flat tappet lifters will wipe these cams so its best to do the swap.