1995-1999 Dodge & Plymouth Neons
Dodge and Plymouth Neon

How do you replace or fix a blinker and taillight on a 1997 Plymouth Neon if neither one is working?

151617

Top Answer
User Avatar
Wiki User
2015-07-15 20:04:58
2015-07-15 20:04:58

Replace the tail light bulb from inside the trunk after pulling back the carpet. This should probably fix your blinker too.

1
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0

Related Questions

User Avatar

how do you replace a taillight on a Honda 2002 Civic?

User Avatar

need to replace my front lower running / blinker bulb how do i do it

User Avatar

Remove the taillight assembly to gain access to the bulbs

User Avatar

Open the tailgate.Remove the taillight bolts, pull taillight toward you to release two clips.Unplug the taillight connecter.Connect the taillight connecter.Install the pushing away from you to fasten the two clips.Install the taillight boltsClose the tailgate.

User Avatar

How do you remove taillight cover on a T-100 toyota Truck

User Avatar

How do you change a front blinker bulb for a BMW X5 2001?

User Avatar

Hi, Is your blinker actually flashing on and off? If not it may be your hazard switch. I had to replace mine.

User Avatar

there are two screws on the inside of the taillight and then you have to slide it out from two brackets, if you can't get the brackets out you may have to pop out the plastic tabs.

User Avatar

Let your tail gate down and there will be two screws holding your taillight on. Remove those and your taillight will pop out.

User Avatar

The blinker relay is broken. It is located inside the hazard switch. Replace the switch and it will fix your problem.

User Avatar

Remove the tail light cover in the cargo compartment. Remove the wiring harness. Remove the blinker retaining screws. Reverse the process to install the new blinker.

User Avatar

You can access the bulb from the trunk area (from behind). Just remove and replace, should be straightforward.

User Avatar

Lenses are not replaceable on the Malibu, you have to replace the entire taillight assembly

User Avatar

To replace a taillight on a 1996 Honda Civic prop open the trunk. Remove the twilight mounting hardware. Push the light outward. The unit should come off in one piece. Replace the taillight with a unit that fits.

User Avatar

Lower the tailgate, and you will see the bolts on the bed side of the taillight,remove the bolts. there are two of them and pull out tailight assembly.

User Avatar

Taillight bulb replacment/Taillight housing replacement * Remove the rear inside trunk finishing panel to access the taillight housing mounting nuts * Free the grommet for the taillight electrical harness and the three taillight housing nuts then pull off the taillight housing * Rotate the bulb socket counterclockwise and pull it out of the taillight housing * To remove the bulb from the socket pull it straight out.To install a new bulb in the socket push it straight into the socket until it stops

User Avatar

* Remove the rear inside trunk finishing panel to access the taillight housing mounting nuts * Free the grommet for the taillight electrical harness and the three taillight housing nuts then pull off the taillight housing * Rotate the bulb socket counterclockwise and pull it out of the taillight housing * To remove the bulb from the socket pull it straight out.To install a new bulb in the socket push it straight into the socket until it stops

User Avatar

You remove the headlight to gain access to the back of the blinker housing, you can reach into the back of it and pull out the light and cable it's attached to. It's a pain.

User Avatar

Open rear hatch, there are two screws in taillight lens, take them out, the lens will lift out, turn the socket and it will relese, replace bulb, (I would recommend using some dielectric grease on bulb socket while you have it out), replace in reverse order. AJ

User Avatar

Easier to just jack the car up so that you can get under it look for the blinker bulb assembly twist it should come out if you line up the holes replace and reinsert

User Avatar

Yes, but you must replace the blinker fluid prior to starting the replacement engine.


Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.