Note:The drivebelt routing decal on the radiator shroud to help during drivebelt install * To replace the belt rotate the tensioner pulley clockwise to release belt tension * Remove the belt from the auxiliary components and slowly release the tensioner * Route the new belt over the various pulleys again rotating the tensioner to allow the belt to be installed then release the belt tensioner
Replace serpentine belt on Chevy avalanche?HOW
Remove serpentine belt. Remove alternator. The bolts that hold the tensioner on are under the alternator.
How to remove and install the serpentine belt on 1991 Chevy Blazer with AC?
Providing your cavalier has a 2.2l, this is what your looking at.
I think it has a serpentine belt,at least mine does You can put a 15mm wrench on the tensioner and pull it toward you, the belt will slide right off.
If it is a serpentine belt you replace the tensioner pulley
This diagram is under the hood. Look for it
Loosen the tensioner pulley on your 2001 Chevy Impala. The serpentine belt will become loose. Take the old belt off and put the new belt on. Tighten the new serpentine belt with the tensioner pulley.
How do you replace timing chain & water pump on a2001 Chevrolet cavalier
if it is a belt squeal, check and replace the serpentine belt and or the tensioner.
GOOYEAR BELTS HAVE A DIAGRAM ON THE BACK OF THERE PACKAGE Sometimes these diagrams can also be found under the hood of your car. In my 1990 cavalier this sticker was located in the area where the serpentine belt goes on.
the 3.1 liter v6 and the 4 cylinder both have sepentine belts
How do you replace the serpentine belt in 1997 sunfire
You need to go to a car parts store, and get a repair manual for your car. They cost about $16.00 Or, go to a Public Library.
Get the Haynes/Chiltons manual. It should be there. Or go to the automotiveforums.com website.
serpentine belt for 97 7.4 454 Chevy truck
need diagram for 1994 chevy truck serpentine belt?
Put the serpentine belt on to the pulleys of your 1994 Chevy engine. Tighten a serpentine belt with the tensioner pulley.
Put the new serpentine belt on to your 1992 Chevy Corsica pulleys. Push the tensioner pulley to the left to tighten the serpentine belt.
The drivebelt routing decal on the radiator shroud to help during drivebelt install
replacing serpentine belt on 2000 chevy prizm need help
Go to your Chevy dealer parts department; they can print a copy for you.
how to replace a serpentine belt on 1992 grand am 2.3l
I paid $169 at Big O.
How do I rethread the serpentine belt on a 2002 Malibu with a V-6?