3.3L and 3.8L Engines note: It is best to use serpentine belt tool kit. All of the belt driven accessories on the 3.3L and 3.8L engines are driven by a single serpentine belt. The belt tension is maintained by an automatic tensioner. # Raise the front of the vehicle and safely support it with jackstands. # Remove the right front splash shield. # Release tension by rotating the tensioner clockwise. # Remove the belt and install a replacement. # Proper belt tension is maintain by the dynamic tension. # Install the right front splash shield. Lower the front of the vehicle.
belt assembly for a 95 Plymouth voyager
The belt is self adjusted by way of a tensioner.
2.4L and 3.0L it is driven by the timing belt. 3.3L and 3.8L it is driven by the serpentine belt.
I HAVE A SHOP MANUAL FOR A 1992 VOYAGER.....IF YOU NEED,,,,I CAN LOOK UP THE INFO YOU NEED.....JTUPKO@SNET.NET
Haines manual or on the inernet look up Autozone.com
www.autozone.com look for specs and or parts location
When routing a new serpentine belt, make note of how the old belt was routed. Take a picture of the belt routing if possible. Also most cars have a sticker under the hood with the routing on it.
there should be an automatic tentioner on the serp. if not look at the alt it will have slotted holes to loosen up
It is located behind the timing belt. Timing belt must be removed to access the pump. Replace timing belt.
Replace serpentine belt on Chevy avalanche?HOW
How do you replace the serpentine belt in 1997 sunfire
The belt tensioner probably needs to be replaced - about $110 @ PepBoys. Check the alignment of all pulleys. If something isn't aligned properly the belt will keep breaking.