The dash cluster has to be removed or partially anyway to get to the bulb. Usually there are about four to six screws depending on the model. good luck
Replace turn signal flasher
On the 1998 Audi A6, the turn signal bulb can be replaced by opening the hood. Reach into the turn signal from the fender wall and push in and turn the old bulb to remove it. Push in and turn to replace with a new bulb.
you need to replace the hazard light switch the turn signal control module is built in the hazard switch.just had same problem a few months ago.
Under the front panel of the car
how do you take out the front signal lamp on a 2004 range rover
The flasher is right above the fuse box, pull it out, and replace it with a good one.
2009 Audi A4 turn signal light bulb lamp replacement: Purchase the correct replacement turn signal light bulb(s) first, before disassembling the vehicle. See sources and related links below for replacement bulb information. Then consult your owner's manual for the turn signal light bulb lamp replacement procedure. As simple as it sounds, the owner's manual is the best place to start for bulb replacement instructions and illustrations. You may want to consider replacing both left and right at the same time in order to keep brightness and color equal (optional).
It's in the hazard warning switch. You need to replace the switch.
For the front turn signal on a Chevy S-10 you remove the parking lamp lenses and replace the bulbs. If it is a rear turn signal bulb the taillight lenses will have to be removed to access the bulb.
You need to replace it. There are 2 screws that hold it on.
look in your owner's manual
Open hood panel and prop with rod. Remove screw at headlamp that holds signal lamp. pull lamp straight forward. remove and replace bulb