Ford Contour
Nissan Pathfinder
Timing Belts and Chains

How do you replace the alternator belt on a 1998 Contour?


Top Answer
User Avatar
Wiki User
Answered 2007-01-09 23:54:01

it the main belt on the side of the motor its on the right of the car


Your Answer

Related Questions

loosen the serpretine belt tension and remove the two bolt that hold the alternator

Well, its black and wraps itself around the smallest pulley on the alternator.

Loosen alternator remove old belt. Reroute new belt, tighten alternator.

Loosen tentioner, remove belt replace retighten.

The alternator belt on a 1998 Honda Civic is replaced by loosening the mounting bracket, disconnecting the wiring harness, and slipping the belt off the pulley. The alternator is then unbolted, removed, and a new unit put in place.

Remove the belt from your 1998 Chrysler Town and Country alternator. Disconnect the wiring from the alternator. Loosen and remove the alternator retaining bolts. Reverse the process to put the new alternator on.

To replace the alternator belt on a Citroen Berlingo, you have to locate the tensioner. You can loosen it to replace it.

Disconnect the 98 LeSabre battery. Remove the alternator belt. Remove the alternator wiring. unbolt the alternator, remove it, and bolt the new one on. Reconnect the wiring, but the belt on, then reconnect the battery.

BeltsYes, you must remove all of the belts to replace the alternator belt. The compressor belt first, then the power steering belt then the alternator belt.

what would it could to replace time belt on a Ford Contour 1999?

first unhook the battery, then release the automatic belt tensioner and remove the belt, then unbolt the alternator and disconnect the wiring from the reinstall, reverse the removal procedure

The alternator belt on a 1998 Dodge Neon is adjusted by loosening the retaining bolts and applying pressure to the side of the alternator with a pry bar. With the belt tight, the alternator can then be bolted down.

1. Suspect the belt is loose. Tighten it or use belt dressing. 2. Bearings are worn out on the alternator. Replace the alternator. 3. Poor workmanship on a rebuilt alternator. Replace the alternator.

can you change the alternator belt in a 1998 Chevy metro from under the car.

You must unbolt the engine from the engine mount and jack the engine up to obtain clearance. You must do this for both the alternator/AC belt as well as with the secondary Supercharger belt.

Remove the neg battery cab;e then the wires on the alternator.. Disengage the belt and take the mounting bolts out of the alternator. There should be a routing schematic for the belt on the fan shroud.

To change the alternator belt on a 1998 Mazda 626 you need to first loosen the bolt that is located in the center of the adjustment pulley. Next, turn the adjustment bolt to the left until the belt is loose and can be removed. Reverse the steps to replace with the new belt.

Remove the power steering belt first then the alternator belt will go on.

Loosen the tensioner pulley. The alternator belt will come loose. Remove the alternator belt. Put the new alternator belt on and tighten the tensioner pulley.

how to replace the alternator belt of a mitsubishi montero 2000 ?

By locating and loosening the 'tensioner' for that belt, if the alternator mount does not include a tensioner.

To replace the alternator on a 1995 Honda Civic disconnect the battery. Disconnect the wiring from the alternator. Loosen the adjustment bracket so the belt has slack. Remove the alternator belt along with the mounting hardware. Pull the alternator and replace it.

hallo how need replace alternator belt and tensionier on peugeot 307 hdi manual?thanks

Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.