through the trunk, open trunk, then look where break lights are, on the door of trunk, top, there are several screws across the top, remove them, then you have access to bulbs.
My 2005 Amanti has a post card size "door" on both sides inside the trunk, behind the tail lights. Simple wing nut and remove to get access to all bulbs. very easy.
How do you replace the third rear brake light in a 2005 buick allure
dose a 2005 Kia amanti strut need pressed in place
dose a 2005 kia amanti strut need pressed in place
i can find no info on it. Its ridiculous
about 3 dollars
y want to replase the bolb from tail light for Honda odysey 1999
Crawl in the backseat, remove the screws on each side of the housing, pull off the light replace the bulb and re-install! Good Luck!
How do you program a keyless entry remote for a 2005 KIA Amanti? Kent
The brake lights on a 2005 Kia Rio Cinco are replaced by removing the retaining bolts, twisting the bulb, and pulling it from the assembly. A new bulb can then be put into place and the assembly remounted.
Bulb #7506 should be the correct brake light. See related links below.
The 2005 Kia Amanti OBD 2 port is under driver side dash next to steering column
Brake lights? Check brake light switch for adjustment or replacement