3/8 Allen wrench 4 the 2 bolts holding pads place c clamp on cup push back once that is done new pads will fit right on if you replace rotors just pull them off studs and replace or have them turned, don't know of many places that turn rotors anymore but if you looked you can find someone im sure.
Remove the tire and wheel from your 1997 Mitsubishi Montero. Remove the brake shoe assembly. Tap on the rotors to loosen them. The rotors will slide off. Reverse the process to install your new rotors.
What are the brake rotors minimum thickness on a 1997 Buick Century? Thanking you in advance.
where are the fuel injectors in a 1997 oldsmobile aurora
are 2wd and 4wd front brake rotors interchangeable on 1997 ranger 4L V6 XLT
when you remove the caliper on the disk brake by removing the bolts on the inside of the caliper the rotor just slides off, the only thing holding the rotor in place is the wheel.
The brake rotors are warped. Someone tightened the lugnuts out of sequence. That compressed and torqued the rotors out of spec. Replace the from rotors and pads and the rear ones too, if necessary.
To replace the pads, just remove the calipers, retract the pistons, and set nre pads in place of the old ones. To replace the rotors, remove the old ones and set new rotors in their place. Before driving the vehicle, repeatedly depress the brake pedal several times until it feels firm like it works. Make sure you spray the new rotors with brake parts cleaner thuroughly after you install them!
remove and replace water pump in 1997 Oldsmobile aurora
To replace the front brake rotors on a 1997 Mercury Mystique, start by safely lifting the vehicle and removing the front wheels. Remove the caliper by unbolting it and hanging it securely without straining the brake line. Take off the old rotor, which may require removing the caliper bracket if it’s hindering access. Install the new rotor, reattach the caliper, and ensure everything is tightened before replacing the wheel and lowering the vehicle.
Disc brakes ( with small brake shoes in the back of the rotors for your parking / emergency brake )
== ==
To replace the rotors on a 1997 Dodge van, first, safely lift the front or rear of the vehicle and remove the wheel. Next, remove the brake caliper by unbolting it, and then slide it off the rotor; secure it to avoid stressing the brake line. Remove the rotor by unscrewing any retaining screws if present, or simply pulling it off the hub. Install the new rotor, reattach the caliper, and ensure everything is securely fastened before replacing the wheel and lowering the vehicle.