go to the dealer i just cracked mine when trying to it never seen anything put together so shoddilly
how to replace the light bulb on the gear shift on 2004 tracker
Remove the cover of the console..around 4 screw ..then lift the cover ,you can see the small bulb on it..
To replace the bulb in the center console of a 1999 Dodge Neon, first, ensure the vehicle is turned off and the keys are removed. Carefully pry off the center console cover using a flat-head screwdriver or a trim tool to avoid damage. Once the cover is removed, locate the bulb socket, twist it counterclockwise to remove it, replace the old bulb with a new one, and then reassemble the console by reversing the steps. Always check that the new bulb works before fully securing the console back in place.
Just changed mine it's simple just pop the bonnet and remove the retaining wires then take the appropriate bulb out and replace easy
Access to the rear lights is gained from the inside of the car Pop out the two bungs on the upright, unscrew the two nuts located behind the bungs. Release the light unit, unclip the bulb holder, then replace the bulb.
How to change light blub in console on a Ford F150.
To replace a bulb in the center console of a Mercedes CLK W208, first, ensure the car is turned off. Carefully pry off the trim surrounding the console using a plastic trim tool to avoid damage. Once the trim is removed, locate the bulb holder, twist it counterclockwise to release it, and replace the old bulb with a new one. Finally, reassemble the trim and ensure everything is securely in place.
Replace the bulb behind it
The shifter light on the center console of a 1999 Honda Civic can be reached by removing the center console assembly. Loosen all of the proper screws and pull off the assembly. Once the bulb is visible replace the unit using an appropriate sized bulb.
pop that console out with a knife or key and then the bulb is a small twist out you'll have to find in a store or online
How to change bulb behind switch of fan Toyota Avenses
To change the high brake bulb on a Fiat Punto, first, open the rear hatch and locate the brake light assembly. Remove the screws or clips securing the assembly and carefully pull it out. Disconnect the wiring harness and twist the old bulb counterclockwise to remove it. Replace it with a new bulb, reconnect the wiring, and reassemble the brake light assembly.