0
To replace the expansion valve on the rear AC of a 1992 GMC Suburban, first ensure the AC system is fully discharged to avoid refrigerant exposure. Remove the rear AC unit's cover and disconnect the refrigerant lines connected to the expansion valve. Remove any mounting screws or bolts securing the valve, then take out the old valve and install the new one, ensuring proper orientation and sealing. Finally, reconnect the refrigerant lines, reassemble the AC unit, and recharge the system with refrigerant.
What else can I help you with?
How do you replace the expansion valve 1992 Honda accord ex?
how do you replace the expansion valve
Where is egr valve in 1992 suburban 350 engine?
It is on the back left hand side of the intake close to the left valve cover
Why does a 1992 suburban with 350 auto surge at 71 mph?
Need to check the EGR valve.
Where is the location of the expansion valve on a 1992 Nissan pickup truck?
insid ac box at floor board.
Where is the expansion valve located in a 1992 Toyota Camry 3.0?
Attached to Evaporator.You have to remove the evaporator from inside the car to get to it. A pain.
How do you replace valve cover gaskets on a 1992 subaru legacy?
Do you still need some assistance?
Where is the AC expansion valve in a 1992 Saturn SL1?
The expansiion valve is loacated in the car behind the firewall under the console. Complete removal of the console and hvac controls is needed.
How do you replace the PCV valve on your 1992 Dakota?
On your valve cover you will see a white short plastic tube with vaccum lines attached. Pull out the hose and pull the pCV valve right out of the valve cover .
Where is the vacuum control valve for the heater on a 1992 GMC suburban and how do I get to it?
The vacuum control valve for the heater on a 1992 GMC Suburban is typically located on the heater control assembly, often behind the dashboard. To access it, you'll need to remove the lower dash panel and possibly the center console, depending on the specific configuration. Once you have access to the heater control area, you can locate the vacuum lines connected to the valve. Be cautious with the electrical connections and vacuum lines during removal and installation.
How do you replace a control body valve in a 1992 Nissan Sentra XE automatic transmission?
bring it to transmission shop
How do you know if a 1992 suburban needs a fuel pump?
After replacing the fuel filter and checking the fuel pump fuse and relay it still does not work, replace it.
When was The Beasts of Suburban created?
The Beasts of Suburban was created on 1992-07-20.
