It's basically the same on every vehicle, NOT a complicated job, yet countless people seem to get hung up on "what wrench to use to loosen caliper" ! - Simply have a full wrench set and an Allen Key set and you can't go wrong. - - You remove the caliper from it's mounting and then take out the disc pads. Move piston back into brake cylinder and fit the new pads into the caliper and remount it.
Yes.
Tools needed to replace front brakes 2002 Ford Focus?
Rear brakes do not have to be replaced too often. It's really hard to tell without looking at it. What you can do is to replace front brakes and test drive it, if you feel that your car brakes works just fine you do not need to replace rear brake shoes.
i did my brakes most of the time it will only need an hour of my time to do both front brakes.....
No. You will only need to replace the brake shoes if they are worn down. Generally the front brakes do 70% of braking leaving the rear with 30%, which will cause the front pads to wear first. What is important however is that you replace either front brakes or rear brakes as a set. i.e. if you're replacing the front brakes do the right and left side.
How do you replace front breaks on 2001 Hyundai acce t
Visit the forums at genvibe.com. There is a nice walk through with brakes to service your front brakes.
£170 As i can presume
2001 forerunner front brake replacement
Your rotors are warped, replace them.
Usually the rear pads or brake shoes depending on whether or not the back brakes are disc or drum brakes will last 2 times longer the the front brakes. 75% of your braking is done by the front brakes. For example, if you have 60,000 miles and your front pads need to be replaced the rear ones will only be about 1/2 worn out.
I have a 99 grand am and I am tring to replace the brakes on the front of my car but when I go to put the brakes back on the caliper wont line up wheats wrong with this? How do I fix this?