0
Replacing sway bar links is relatively easy for the 'average' do-it-yourselfer; although it can be frustrating trying to replace them on your back.
They are usually loacated on the lower control arms as a long 4-6" bolt or PVC rod connected to the sway bar itself, which rides along the undercarriage of the car and connects to the opposite control arm in the same manner. It is, essentially, a torsion bar that refers weight to the opposite side when you are cornering to maintain steering control.
Depending on the year of your Taurus and the configuration of links that you have; as well as if it is already broken or not; first spray it down with penetrating oil and let it soak to make removal easier.
Raise the front end EVENLY and brace the control arms with jack stands (the hanging weight on the control arms can help keep the bolts from spinning when you start to loosen them. The floor jack braces will keep the control arms from falling too far once the bolts are loose.)
Once the old parts are removed, replace with new pieces from your kit in the reverse order. Rather than trying to pry down on the sway bar (to make the bolts reach), lower the car VERY GENTLY with the jack stands in place until you can tighten them properly (according to the directions in the kit).
Once they are properly tightened, raise the car enough to remove the jack stands; lower the car, and you should be good to go. Probably wouldn't be a bad idea to have the alignment checked, too.
What else can I help you with?
How Do you replace the front sway bar link in mercury grand marquis?
how do you replace the front sway bar likn in a 1999 Grand Marquis?
What is the bar that runs next to the shock on the front end?
sway bar end linksway bar end link
How do you replace the front sway bar links bushings and mounts on a 1986 Jaguar XJ6?
To replace the front sway bar link bushings and mounts on a 1986 Jaguar XJ6, first lift the vehicle and secure it on jack stands for safety. Remove the wheels to access the sway bar links, then use a socket wrench to detach the sway bar link bolts from the sway bar and the control arm. Replace the old bushings with new ones, ensuring they are properly seated, and reattach the sway bar links, tightening the bolts to the manufacturer's specifications. Finally, reassemble the wheels and lower the vehicle.
How do you replace front sway bar on 2000 buick regal?
I have a 2000 Buick Regal GS how do I change my front sway bar
How do you replace the sway bar link on a 1997 ford explorer?
Check with a Ford dealer - there was a recall on the front sway bar links because under certain conditions they could fracture - so they were replacing the left and right front sway bar links under the recall. (Helpfull)
How do you replace sway bar link of a 2001 expedition?
Do you mean Stabilizer Bar?
How do you replace the front sway bar on a 2004 Pontiac Grand Prix?
To replace the front sway bar on a 2004 Pontiac Grand Prix, first, raise the vehicle and secure it on jack stands. Remove the front wheels for better access, then detach the sway bar links and brackets from the sway bar. Once disconnected, remove the sway bar from its mounting points on the frame. Install the new sway bar by reversing the removal process, ensuring all bolts are tightened to the manufacturer's specifications.
How do you replace sway bar link on a 2004 Chrysler Pacifica?
To replace the sway bar link on a 2004 Chrysler Pacifica, first, raise the vehicle and secure it on jack stands. Remove the wheel to access the sway bar link, then use a wrench to detach the old link from the sway bar and the lower control arm. Install the new sway bar link by tightening it to the manufacturer's specifications, ensuring proper alignment. Finally, reattach the wheel, lower the vehicle, and torque the lug nuts to the correct specifications.
What causes the front end to squeak on a Ford Sport Trac?
change the sway bar rubber bushings and sway bar link bushings
How many sway bar links does a 2002 Chevy trailblazer have 2wheel drive?
It has a sway bar in the front and in the rear. It has a connecting link at each end of each sway bar = 4 total
How do you replace a swaybar link in a Chevy Tracker?
To replace a sway bar link in a Chevy Tracker, start by safely lifting the vehicle and securing it on jack stands. Remove the wheel to access the sway bar link, then use a wrench to loosen and remove the nuts securing the link to the sway bar and the lower control arm. Replace the old sway bar link with a new one, ensuring it is properly aligned, and tighten the nuts securely. Finally, reattach the wheel, lower the vehicle, and check for proper installation before driving.
How do i replace the sway bar pins in my 93' Grand Am?
Sway bar link kits are available at your local auto parts store. They simply bolt in.
