To replace a sway bar link in a Chevy Tracker, start by safely lifting the vehicle and securing it on jack stands. Remove the wheel to access the sway bar link, then use a wrench to loosen and remove the nuts securing the link to the sway bar and the lower control arm. Replace the old sway bar link with a new one, ensuring it is properly aligned, and tighten the nuts securely. Finally, reattach the wheel, lower the vehicle, and check for proper installation before driving.
A sway bar link kit is available from your local auto parts store. Remove what is left of the broken link and replace it with the new one. Change them in pairs would be recomended.
Where is the fusible link in a 2005 Chevy HD truck
how to replace a center link on Chevy astro van 1994 suspension
Not long if you're on a lift. I would recommend changing both sides though.
You may want to also look at your swaybar, the swaybar bushings, the swaybar links, the link bushings, the tie rods, and the wheel bearings - any one or combination of those could create a bad vibration at high speeds if faulty. I had to replace the swaybar links and bushings on my 95 GC Laredo to solve a similar issue. With the replacement of the rear end you might want to also be sure that the axle gears are properly aligned, free of dirt and debris, and well lubricated.
Look at the link I posted, that should help you. (:
Go to google and type in download link for invasion tracker.
See the related link below for a trusted pin tracker.
A "lift" link I've never heard of. But a stabilizer link is located at each end of the sway bar that runs roughly beteween the front wheels. The link connects the swaybar to the lower control arm.
someone done something to my 2001 Chevy Tahoe front bumper. its damaged but its not dents. is there a way to repair it.
Here's a link I just found. Hope this helps http://www.bodyshopzone.com/archives/trim/door_panels/Chevy/CK1500_1998/dp_remove_chevy.html
see my profile see link.