answersLogoWhite

0


Best Answer

First you need a small mirror and a pair of small 45 degree internal snap ring pliers. On the back of the regulator housing, you look with the mirror and you will see the two small holes to the snap ring. reach the pliers around the outside of the coil pack with your right hand and hold the mirror back behind the regulator by stretching your left across the intake plenum. Once you get the snap ring out wiggle the regulator and it should come straight back out. Installation is reverse.

User Avatar

Wiki User

โˆ™ 2009-05-17 06:56:38
This answer is:
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
User Avatar
Study guides
๐Ÿ““
See all Study Guides
โœ๏ธ
Create a Study Guide

Add your answer:

Earn +20 pts
Q: How do you replace the fuel pressure regulator on a 1998 38 firebird is it necessary to remove the fuel rail?
Write your answer...
Submit
Related questions

Can you replace the fuel pressure regulator on a 3.4 1995 firebird your self?

not serviceable but now you can buy a regulator rebuild kit otherwise you will have to buy the entire fuel rail assembly


How do you replace a fuel pressure regulator on a1992 Bonneville SE?

u dont it does it by itself just put it in the area of fuel and boom a pressure regulator


How do you replace a Pressure Regulator valve on a geyser?

Quit simple...First you...


How do you replace fuel regulator on a 1994 Cadillac deville?

The Regulator for a 1994 Deville is mounted on the fuel rail. Disconnect the battery, then relieve fuel pressure. Remove the vacuum line from the regulator and unscrew it to replace.


How do you replace a 1975 Firebird door window?

undo the glass from the regulator and pull it up out of the door and get new gass and drop it down inside the door into the window channels and rehook the glass to the regulator.


Is there any way to check the fuel pressure regulator on 2002 dakota sport?

The regulator is only available with the fuel pump. So if the pressure is not correct, you need to replace the pump.


How do you replace fuel pressure regulator in a 96 jeep Cherokee?

By replacing the fuel pump assembly. The regulator is built into the assembly itself


Can you rebuild the fuel pressure regulator on a 1995 Chevy silverado?

Yes.. But it would be cheaper to just buy the whole regulator and replace it.


Where is the fuel pressure regulator located on a 2001 ford expedition?

Fuel Pressure Regulator is located on the fuel rail.Fuel Pressure Regulator 1. Disconnect the negative battery cable. 2. Properly relieve the fuel system pressure. 3. Remove the air cleaner outlet tube(s). 4. Remove any necessary components to access the pressure regulator. 5. Disconnect the vacuum hose from the pressure regulator. 6. Remove the pressure regulator attaching screws. 7. Remove the pressure regulator from the fuel rail. To Install 8. Discard the O-rings on the pressure regulator and replace them with new ones. 9. Lubricate the O-rings with clean engine oil. 10. Install the regulator into the fuel rail and tighten the retaining screws. 11. Connect the vacuum hose to the regulator. 12. Install any components removed to access the regulator. 13. Install the air cleaner outlet tube(s). 14. Connect the negative battery cable.


Where is the fuel pressure regulator on a 99 ford expedition Eddie Bauer?

Fuel Pressure Regulator is located on the fuel rail.Fuel Pressure Regulator 1. Disconnect the negative battery cable. 2. Properly relieve the fuel system pressure. 3. Remove the air cleaner outlet tube(s). 4. Remove any necessary components to access the pressure regulator. 5. Disconnect the vacuum hose from the pressure regulator. 6. Remove the pressure regulator attaching screws. 7. Remove the pressure regulator from the fuel rail. To Install 8. Discard the O-rings on the pressure regulator and replace them with new ones. 9. Lubricate the O-rings with clean engine oil. 10. Install the regulator into the fuel rail and tighten the retaining screws. 11. Connect the vacuum hose to the regulator. 12. Install any components removed to access the regulator. 13. Install the air cleaner outlet tube(s). 14. Connect the negative battery cable.


How do you remove a fuel pressure regulator on a 2005 ford expedition Eddie Bauer?

Fuel Pressure Regulator is located on the fuel rail.Fuel Pressure Regulator 1. Disconnect the negative battery cable. 2. Properly relieve the fuel system pressure. 3. Remove the air cleaner outlet tube(s). 4. Remove any necessary components to access the pressure regulator. 5. Disconnect the vacuum hose from the pressure regulator. 6. Remove the pressure regulator attaching screws. 7. Remove the pressure regulator from the fuel rail. To Install 8. Discard the O-rings on the pressure regulator and replace them with new ones. 9. Lubricate the O-rings with clean engine oil. 10. Install the regulator into the fuel rail and tighten the retaining screws. 11. Connect the vacuum hose to the regulator. 12. Install any components removed to access the regulator. 13. Install the air cleaner outlet tube(s). 14. Connect the negative battery cable.


Where is the fuel pressure regulator located on a 2005 expedition Eddie Bauer?

Fuel Pressure Regulator is located on the fuel rail.Fuel Pressure Regulator 1. Disconnect the negative battery cable. 2. Properly relieve the fuel system pressure. 3. Remove the air cleaner outlet tube(s). 4. Remove any necessary components to access the pressure regulator. 5. Disconnect the vacuum hose from the pressure regulator. 6. Remove the pressure regulator attaching screws. 7. Remove the pressure regulator from the fuel rail. To Install 8. Discard the O-rings on the pressure regulator and replace them with new ones. 9. Lubricate the O-rings with clean engine oil. 10. Install the regulator into the fuel rail and tighten the retaining screws. 11. Connect the vacuum hose to the regulator. 12. Install any components removed to access the regulator. 13. Install the air cleaner outlet tube(s). 14. Connect the negative battery cable.


Where is the pressure regulator located on a 2004 Chevy Silverado 4.8?

how to replace a fuel line presure regulator on a 2004 4.8 chevy silverado


How do you replace a fuel pressure regulator in a 1999 z24 cavalier?

Remove the fuel rail


How much does it cost to replace a water pressure regulator?

To replace a 3/4 pressure reducing valve should be $400-$500 9/12/12 md


How do you replace fuel pressure regulator 2003 Chevy Venture?

try this video with the instructions located below the videio http://www.ehow.com/video_4804005_replace-pressure-regulator-gm-engine.html


How do you replace a fuel pressure regulator on a 2001 Chrysler Sebring 2.7 liter?

The regulator is part of the fuel pump. You have to drop the fuel tank to access.


Where is fuel pressure regulater on 95 4x4 4.3 Chevy blazer?

how do u replace fule pressure regulator in 94 blazer vortec


Where is the fuel pressure regulator located on a Lincoln LS?

i had this issue, im not sure exactly why it does it, but i had to replace the trans.


What do you replace when you find out it does not have the right amount of fuel pressure?

Fuel filter, fuel regulator are fuel pump.


How do you replace the fuel pressure regulator on a s-10?

We need to know what year and engine you have to accurately answer that Q.Fuel Pressure Regulator is located on the fuel rail.Fuel Pressure Regulator1. Disconnect the negative battery cable.2. Properly relieve the fuel system pressure.3. Remove the air cleaner outlet tube(s).4. Remove any necessary components to access the pressure regulator.5. Disconnect the vacuum hose from the pressure regulator.6. Remove the pressure regulator attaching screws.7. Remove the pressure regulator from the fuel rail.To Install8. Discard the O-rings on the pressure regulator and replace them with new ones.9. Lubricate the O-rings with clean engine oil.10. Install the regulator into the fuel rail and tighten the retaining screws.11. Connect the vacuum hose to the regulator.12. Install any components removed to access the regulator.13. Install the air cleaner outlet tube(s).14. Connect the negative battery cable.


How do you replace a fuel pressure regulator on an 2006 v10?

Fuel Pressure Regulator is located on the fuel rail.Fuel Pressure Regulator1. Disconnect the negative battery cable.2. Properly relieve the fuel system pressure.3. Remove the air cleaner outlet tube(s).4. Remove any necessary components to access the pressure regulator.5. Disconnect the vacuum hose from the pressure regulator.6. Remove the pressure regulator attaching screws.7. Remove the pressure regulator from the fuel rail.To Install8. Discard the O-rings on the pressure regulator and replace them with new ones.9. Lubricate the O-rings with clean engine oil.10. Install the regulator into the fuel rail and tighten the retaining screws.11. Connect the vacuum hose to the regulator.12. Install any components removed to access the regulator.13. Install the air cleaner outlet tube(s).14. Connect the negative battery cable.


If removeing window motor on firebird do you have to remove window and regulator?

Depending on the year, 92 through 97. Yes! The motor is riveted to the regulator. You must remove as a unit, drill a hole in regulator arm and insert a bolt and nut to keep from springing back. Then drill out rivets to motor replace motor with bolts and remove bolt in regulator arm.


What would cause gasoline to leak into the oil filter?

The gas is probably not leaking into the filter but the engine. It's caused by a broken diaphragm on the fuel pressure regulator. Replace regulator


Where is the fuel pressure regulator on a 4.3 engine in a 1997 GMC jimmy?

need to replace the fuel regulator in my 2000 gmc jimmy, needing a diagram of motor can you help? thanks