are you trying to change the entire headlight assembly? or just the bulb.
what year
Did you ever find out how to change the headlight assembly? If so, please let me know how to do it :)
See posting for "How do you change the headlamp bulb in a 2003 Grand Prix?" All these model years are similar in production for the headlamp assembly.
It depends completely on what year it is. If it is a composite style headlight (newer years), then the bulb should remove from the back of the assembly, while the assembly is left in the car. If it is an older year model, then the assembly is held in with two screws that can be reached from the front of the head light.
To change the headlight bulbs in a 1995 Pontiac Grand Prix SE, first, open the hood and locate the headlight assembly. Remove the retaining clips or screws holding the assembly in place, then gently pull the assembly forward. Disconnect the electrical connector from the old bulb, twist the bulb counterclockwise to remove it, and replace it with the new bulb. Finally, reassemble the headlight assembly and secure it back in place.
There are bolts surrounding the headlamp. remove these and the wires.
You will have to replace the regulator assembly.
Ok simple lift hood up and on the headlight assembly you'll see 3 bolts "10mm socket size" take them out and the headlight assembly will pull out far enough for you to reach the bulb sockets. Change them and do everything in reverse. It had me going at first also! RJ
I'm trying to replace the headlight assembly for a 2000 Jeep Grand Cherokee Lerado. What bolts or screws do I remove
The piece that a headlight assembly snaps into on a Jeep Grand Cherokee is called a headlight collar. It is also called a headlight assembly.
If it's the same as a 96 Pontiac Grand AM GT, than you would need a 10mm socket and rachet there are three bolts on top of headlight remove these and just pull out headlight. Disconnect the wire going to the bulb you want to replace.