what year
Wiki User
∙ 17y agoThere are bolts surrounding the headlamp. remove these and the wires.
If it's the same as a 96 Pontiac Grand AM GT, than you would need a 10mm socket and rachet there are three bolts on top of headlight remove these and just pull out headlight. Disconnect the wire going to the bulb you want to replace.
See posting for "How do you change the headlamp bulb in a 2003 Grand Prix?" All these model years are similar in production for the headlamp assembly.
Remove the headlight by taking out the three 10mm bolts on top and unscrew the bulb from the backside.
are you trying to change the entire headlight assembly? or just the bulb.
Open the hood and there are screws on both sides loosen then move flaps and pull light backwards until you can get to the bulb.
how do I change the headlight bulb in my 2994 Pontiac grand am gt.o
No, the only thing it could possibly do is blow the bulb.
Ok simple lift hood up and on the headlight assembly you'll see 3 bolts "10mm socket size" take them out and the headlight assembly will pull out far enough for you to reach the bulb sockets. Change them and do everything in reverse. It had me going at first also! RJ
2004 Pontiac Grand Am headlight bulb lamp replacement procedure: Purchase the correct replacement headlight bulb(s) first, before disassembling the vehicle. See sources and related links below for replacement bulb information and full light bulb part numbers list. Then consult your owner's manual for the headlight bulb lamp replacement procedure. As simple as it sounds, the owner's manual is the best place to start for bulb replacement instructions and illustrations. You may want to consider replacing both left and right at the same time in order to keep brightness and color equal (optional).
Replace headlight bulb only when blown.
It depends completely on what year it is. If it is a composite style headlight (newer years), then the bulb should remove from the back of the assembly, while the assembly is left in the car. If it is an older year model, then the assembly is held in with two screws that can be reached from the front of the head light.